• Many people like having a dedicated number for faxes.
  • Wrap the red wire's bare section around the red connector's screw, then repeat with the green wire and the green connector.
  • The Network Interface Device box is where the telephone wire from the phone company terminates, and also where the phone wiring going into the house will connect to your landline phone.

How to Hook Up a Second Phone Line

If you discover that you have an older phone box, contact the phone company. If you hear it, dial your primary number. Install your telephone jack if necessary. Once everything is set, they should give you the new number and a date when the work will be completed. If that fixes the problem, you will need to get a new phone.

It Still Works

Run the telephone wire back to your Network Interface Device box. The yellow and black wires will now be carrying the second line, while the red and green will carry the primary line. This line must be plugged back in once you've completed the wiring.

If so, just plug the free end of the cable into an electrical outlet. Strip an inch off of the end of each of the colored wires. Warnings When stripping the cover from a wire, be careful not to cut the insulation too deeply.

Hooking up telephone line

How to Connect an Arris Cable Modem to a Phone Line

Hooking up telephone line

This is just a safety precaution, as it will disconnect the power flowing from the phone company line. Tips If the telephone company has not done maintenance on your home phone line for several years, you may have an older phone box that preceded the Network Interface Device. Make sure the wiring is not loose, and try the phone in a different jack. Plug the company line back in. You may have to call the company and request that they activate your phone line before you can use your landline.

This will allow you to install your telephone jack along with the cable that you'll use to connect to the Network Interface Device box. This wikiHow teaches you how to wire a landline telephone from your home's phone box also known as a Network Interface Device to your home's telephone jack. Attach the telephone jack to your Network Interface Device box. Tell them that you want a second line added to your account. Once he makes any necessary connections or repairs, the second line will be ready to go, and you can do the interior wiring yourself.

It should plug back into the port into which it was initially inserted. If you already have a telephone jack in your house, skip this step. While most phone companies will perform this task for you, it is often cheaper to complete the installation yourself. These posts are where your new wiring will connect to the phone company wiring.

  1. In the specified room, find the desired jack for the second line, and unscrew the faceplate from the wall.
  2. They will usually come to your home and replace the older box with an updated box at no cost to you.
  3. The plugs look just like the phone jack that you plug your phone into inside of your house.
  4. Plug your receiver into a power outlet.

Is this article up to date? Already answered Not a question Bad question Other. Separate the green wire and the red wire.

How to Wire a Telephone 12 Steps - wikiHow

If you don't have a telephone jack and cable installed in your house, follow the steps in the linked article. Tell your phone company that you will be doing the wiring inside your home. If you have a telephone jack but no cable, follow the linked article's steps to connect one end of a telephone cable to the telephone jack. Inside, you will notice modular plugs and two screws.

Hooking up telephone line

Lastly, double check for dial tones at each outlet while you're working on it. With a soldering iron and some solder would be the most reliable option. As long as you use the same colors on both ends, it doesn't matter. If you have a room with only one phone jack but you want two-line access in that room, there's a simple remedy.

How to Hook Up a Second Phone Line

The older boxes are simply plastic or metal covers which are screwed on to the telephone wiring box to protect it from the elements. How do I hook up my new phone line to the phone company's box outside? We'll also go over adding a line to a room that currently doesn't have a phone jack, so you will be able to pick and choose where you want the second line to be located. You could use a multimeter. Unplug the phone company line.

Article Info This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness. This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness. Then, re-install the faceplate to the wall.

On the back side of the jack, unscrew the red and green wires and make sure the black and yellow are connected. Locate the Network Interface Device box on the outside of your house. Don't screw the plate back on yet. How do I connect blue and white wires to red, green, yellow, and black wires? Keep in mind that the more options you include, website the higher the charge will be for the line.

Video of the Day

Hooking up telephone line

Adding a second line to your home is an easy task that even the least experienced do-it-yourselfer can do without costly interference from a telephone technician. If that is not the case, try plugging in a different phone. Before you begin your wiring project, you'll need to unplug the phone company line that is plugged into the jack inside the box. With all four wires connected, dating the phone does the work of identifying which line is ringing. Wrap and tape them as described earlier.

It is very thin, and pressing too hard could result in cutting the wire itself. The first step to adding a second line is calling your phone company. It has two jacks on it, one on top of another. Your phone receiver may have a built-in power cable. If there are more, grand canyon dating project you would be well advised to ask your phone company to send out a technician.

Hooking up telephone line

Wrap the red and green wires back down the phone cable and tape the ends with black electrical tape. Cookies make wikiHow better. The phone wire currently running through your house can handle two lines. Attach your landline's receiver to your router if necessary.

  • Just single parents dating
  • Dating italy girls
  • How to matchmaking destiny
  • Dating shy asian girl
  • Married man single woman friendship
  • Dating online botswana
  • Foreigners in korea dating
  • Dating indonesian
  • Rico blanco dating gawi download
  • Dating in bulawayo zimbabwe